QualityPRO Power Washing Sleeper Cab Deluxe Wash in Chattanooga TN

The Foodliner Sleeper Cabs Deluxe Wash was performed as a recurring bi‑weekly service at the Chattanooga location, focused on maintaining a consistently clean and professional appearance for a defined group of units:

220021, 220112, 220124, 221063, 222040, 222097, 223091, 223099, 223248, 226003, 226023, 226072, 226073, 227016, 227019, 227020.

Each service cycle followed a structured, repeatable process designed to protect the equipment while keeping the sleeper cabs road‑ready and presentable.

**Initial Inspection and Preparation**
At the start of each visit, the assigned units were identified and walked down to assess overall condition, buildup of road film, diesel residue, and bug accumulation, especially on front ends, mirrors, and sleeper areas. This quick inspection helped determine where heavier applications of detergent or brightener would be required. Loose debris was cleared as needed to ensure effective washing.

**Detergent Application and Pressure Cleaning**
The primary cleaning phase used a controlled blend of detergents formulated for heavy‑duty truck exteriors. Detergent was applied evenly across the tractors and sleeper cab areas, with extra attention on:

- Front caps, grilles, and bumpers
- Sleeper panels and doors
- Fuel tank areas and steps
- Lower body panels and splash zones

After the detergents had appropriate dwell time to break down road grime, the units were pressure cleaned. Pressure settings and spray patterns were managed to remove film and residue without damaging paint, decals, seals, or sensitive components. This step lifted the majority of accumulated dirt, leaving the surfaces ready for targeted brightening where needed.

**Selective Use of Brightener**
Brightener was not blanket‑applied; it was used only where conditions warranted it, such as on dulled or stained metal surfaces and areas affected by oxidation or heavy road film. These locations were treated carefully, with controlled application to avoid streaking or over‑treating adjacent materials. The goal was to restore a clean, uniform appearance to visible metal and finish surfaces while preserving existing coatings.

**Thorough Rinse and Final Appearance Check**
Following detergent and brightener applications, each unit received a comprehensive fresh‑water rinse. This final rinse removed any remaining chemical residue and ensured that no streaks, film, or spotting were left on painted or glass surfaces.

Once rinsing was complete, a final visual check was performed around each sleeper cab and tractor, confirming:

- Removal of surface residue and visible grime
- Even finish on treated metal and painted surfaces
- Clean appearance of front ends, sleeper sides, and lower panels

By completing this process on a bi‑weekly schedule, the Chattanooga fleet of Foodliner sleeper cabs remained consistently clean, with buildup controlled before it became difficult to remove. The completed work provided a reliable, repeatable level of cleanliness and presentation across all listed units throughout the service period.