QualityPRO Power Washing Comprehensive Exterior Cleaning in McDonald TN

This project involved a comprehensive exterior cleaning of a one-story residence, its surrounding hardscapes, a stone fountain, and a one-story commercial metal roof in McDonald. The work focused on restoring surfaces, improving curb appeal, and protecting exterior materials from long-term staining and organic growth.

The house wash included the full front porch along with all exterior vertical surfaces. The soffits, fascia, exterior gutters, and downspouts were carefully cleaned, as well as the home’s main wall surfaces, which included a mix of siding materials such as brick, vinyl, Hardie board, or stucco. A soft wash process was used throughout, applying a controlled blend of detergents designed to loosen and break down dirt, dust, mold, mildew, pollen, cobwebs, and other accumulated residues without damaging the finishes.

Where light staining and embedded dirt were present, these areas were gently scrubbed to help lift contaminants from the surface. After treatment, all sections of the home’s exterior, including the porch area, were thoroughly rinsed to wash away detergents and residues, leaving the surfaces clean and refreshed. The house wash was completed under a 1-year mold and mildew warranty, with the roof cleaning portion covered for 2 years.

The commercial metal roof on the one-story structure was also cleaned using a soft wash technique. A tailored blend of detergents was applied to the roof panels to remove organic growth, atmospheric dirt, and other pollutants that tend to accumulate on metal roofing. Care was taken to work methodically across the roof, allowing the cleaning agents the appropriate dwell time before rinsing. The roof was then thoroughly rinsed to ensure that both residues and detergents were fully removed, restoring a uniform, clean appearance. This service is backed by a 2-year mold and mildew guarantee.

On the ground level, the driveway and walkway pavers—along with any brick or stone hardscape areas—were surface washed. Detergents were used to break down mold, mildew, dirt, and other contaminants within the textured surfaces and joints of the pavers and stone. Once the cleaning solution had done its work, these surfaces were extensively rinsed to flush away loosened debris, brighten the appearance of the materials, and provide a cleaner, more uniform finish from the driveway to the walkways.

The stone fountain received similar attention. Its stone surfaces were treated with detergents formulated to remove biological growth and surface staining without harming the stone. The fountain was carefully washed to reach crevices and contours in the stonework, followed by a thorough rinse to clear all residues. The result is a visibly cleaner fountain that better showcases the details of the stone.

Across all areas—the exterior, the commercial metal roof, the hardscape pavers, and the stone fountain—the project was completed with an emphasis on gentle but effective cleaning, protection of materials, and a detailed final rinse to leave every surface looking renewed.